求救下，帮看看开卡的问题出在哪边。

m0l01ehz · 发表于 2016-3-28 23:54:45

开卡失败，焊接放大镜检查过了，没有虚焊  没有短路.SF2281的主控，用的是29f64g08cbaaawp的F，准备先焊4片开个32G的试试看的。一直失败中。配置中，电源保护开了，温度选项选择的TM75的。

下面是开卡的log

Starting command:[/root/soft/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 2:0:0:0 "/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp" "/root/mpt/22454.123456.driveconfig" 2281 2281  LOG="/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log" ]...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 09/28/2014 08:46:05] - SF_Genesis has been invoked with the following parameters:

                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  argv[1]: -PROCESS_SSD
                  argv[2]: 2:0:0:0
                  argv[3]: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
                  argv[4]: /root/mpt/22454.123456.driveconfig
                  argv[5]: 2281
                  argv[6]: 2281
                  argv[7]: LOG=/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 09/28/2014 08:46:05] - Instructing the operating system to purge any existing cached data for device: '2:0:0:0'
[Sun 09/28/2014 08:46:10] - Issuing a discovery command for device: '2:0:0:0'
[Sun 09/28/2014 08:46:16] - Discovery command completed...
[Sun 09/28/2014 08:46:16] - Waiting 5 seconds for the system to settle...
[Sun 09/28/2014 08:46:21] - Device designation string '2:0:0:0' is mapped to node '/dev/sg2'
[Sun 09/28/2014 08:46:21] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
            DeviceName = /dev/sg2
MFP Package Filename = /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
   Configuration File = /root/mpt/22454.123456.driveconfig
            Serial No. = 2281
      World Wide Name = 2281
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 09/28/2014 08:46:21] - Successfully received the IDENTIFY data from the drive...
[Sun 09/28/2014 08:46:21] - Validating Manufacturing Firmware Package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 09/28/2014 08:46:29] - Successfully opened the package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 09/28/2014 08:46:29] - file  /root/mpt/22454.123456.driveconfig Loaded successfully
[Sun 09/28/2014 08:46:29] - Warning:  Unable to query diagnostics information to perform power management settings check
[Sun 09/28/2014 08:46:29] - B01 Power Management configuration request detected
[Sun 09/28/2014 08:46:29] - Successfully extracted *.DriveConfig file: /root/mpt/22454.123456.driveconfig
[Sun 09/28/2014 08:46:29] - Extracted Config_ID: 1 (22454) in DriveConfig file: /root/mpt/22454.123456.driveconfig
[Sun 09/28/2014 08:46:29] - Extracted SerialOutputControl: 0
[Sun 09/28/2014 08:46:29] - Searching for flashware image for configuration 22454
[Sun 09/28/2014 08:46:29] - Manifest found for configuration 22454
[Sun 09/28/2014 08:46:29] - Flashware image extracted: 22454_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
[Sun 09/28/2014 08:46:29] - Searching for manufacturing image for configuration 22454
[Sun 09/28/2014 08:46:29] - Manifest found for configuration 22454
[Sun 09/28/2014 08:46:29] - Manufacturing image extracted: 22454_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
[Sun 09/28/2014 08:46:29] - Proceeding in ROM mode, download feature 3...
[Sun 09/28/2014 08:47:35] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      ATA COMMAND : 0x0092  (146)
      ATA FEATURE : 0x0003  (3)
      Device Status: 0x0001  (1)
      Driver Status: 0x0000  (0)
         Host Status: 0x0008  (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
  0 -       No Sense: 114 (0x72) OK
  1 -  Recovered Error:  11 (0x0B) FAIL
  2 -       Not Ready: 0 (0x00) OK
  3 -    Medium Error: 0 (0x00) OK
  4 - Hardware Error: 0 (0x00) OK
  5 -  Illegal Request: 0 (0x00) OK
  6 - Unit Attention: 0 (0x00) OK
  7 -    Data Protect:  14 (0x0E) OK
  8 -    Blank Check: 9 (0x09) OK
  9 -  Vendor Specific:  12 (0x0C) OK
10 -    Copy Aborted: 0 (0x00) OK
11 -  Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 -  Volume Overflow: 0 (0x00) NA
14 -    Miscompare: 0 (0x00) OK
15 -       Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~

[  174.460470] ata3.00: failed command: STANDBY IMMEDIATE
[  174.460474] ata3.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  174.460475]       res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[  174.460477] ata3.00: status: { DRDY ERR }
[  174.460479] ata3.00: error: { ABRT }
[  174.460485] ata3.00: device reported invalid CHS sector 0
[  174.460495] sd 2:0:0:0: [sdc] START_STOP FAILED
[  174.460497] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  174.460500] sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
[  174.460503] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
[  174.460527] ata3.00: disabled
[  179.462687] ata3: hard resetting link
[  179.918050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  179.918261] ata3.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[  179.918264] ata3.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[  179.921244] ata3.00: configured for UDMA/133
[  179.921249] ata3: EH complete
[  179.921323] scsi 2:0:0:0: Direct-Access    ATA    SandForce{200026 20DA PQ: 0 ANSI: 5
[  179.923781] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  179.924822] sd 2:0:0:0: [sdc] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[  179.924824] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[  179.924866] sd 2:0:0:0: [sdc] Write Protect is off
[  179.924868] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[  179.924887] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  179.925490]  sdc: unknown partition table
[  179.931693] sd 2:0:0:0: [sdc] Attached SCSI disk
[  203.712150] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  203.712154] ata3.00: failed command: DOWNLOAD MICROCODE
[  203.712159] ata3.00: cmd 92/03:66:00:80:01/00:00:00:00:00/00 tag 0 pio 52224 out
[  203.712160]       res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[  203.712162] ata3.00: status: { DRDY }
[  203.712169] ata3: hard resetting link
[  209.217015] ata3: link is slow to respond, please be patient (ready=0)
[  213.756014] ata3: SRST failed (errno=-16)
[  213.756023] ata3: hard resetting link
[  219.261014] ata3: link is slow to respond, please be patient (ready=0)
[  223.800011] ata3: SRST failed (errno=-16)
[  223.800020] ata3: hard resetting link
[  229.305012] ata3: link is slow to respond, please be patient (ready=0)
[  258.834012] ata3: SRST failed (errno=-16)
[  258.834021] ata3: limiting SATA link speed to 1.5 Gbps
[  258.834028] ata3: hard resetting link
[  263.880013] ata3: SRST failed (errno=-16)
[  263.880018] ata3: reset failed, giving up
[  263.880021] ata3.00: disabled
[  263.880039] ata3: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 09/28/2014 08:47:35] - End of Genesis manufacturing log.
[Sun 09/28/2014 08:47:35] - Exiting...
[Sun 09/28/2014 08:47:35] - Overall Result for Device: /dev/sg2 ****** FAIL ******

Process exited with code 20

描述:是

cw1sodg · 发表于 2016-3-28 23:54:45

就是不需要toggle跳线所以你需要改成ONFI异步跳线啊……

jut5u5oq · 发表于 2016-3-28 23:54:45

我再检查焊接看看。20能不能具体的看出是虚焊或者是短路

p20e5fdh · 发表于 2016-3-28 23:54:45

你主板的AHCI支持是原生的还是兼容的？

内容来自Android手机客户端

zqpyz6gx · 发表于 2016-3-28 23:54:46

-。- 没注意拍到烟了，开机的时候显示了3th mastor hard disk error。是连接线的问题吗。能够认盘。

eult6bh · 发表于 2016-3-28 23:54:46

这个闪存应该不需要toggle跳线吧

7yywjl · 发表于 2016-3-28 23:54:46

本帖最近评分记录：共3条评分，M币+16
剧毒M币 +3目测主控挂了加焊就好2014-09-28
千年之戀︶ㄣM币 +10歡迎探討2014-09-28
qas999M币 +3这个是intel 板子吧默认是toggle跳线？跳线改对了么？2014-09-28

数码之家22合一：性价比最高的S2拆机工具！告别CR-V，进阶级拆客必备！回复举报

离线qas999

UID：781593

注册时间2009-12-10 最后登录2016-03-25 在线时间2809小时发帖1067 搜Ta的帖子精华0 M币576专家13 访问TA的空间加好友用道具

数码3段

发帖1067M币576专家13粉丝187加关注发消息只看该作者 1楼发表于: 2014-09-28

这个是intel 板子吧默认是toggle跳线？跳线改对了么？

dwmqwj0 · 发表于 2016-3-28 23:54:46

跳线~写保护~都先确认下~在开卡~ 20多数是焊接的问题貌似~

36u845 · 发表于 2016-3-28 23:54:47

我只看到了那包中华。。。

话说看起来是SATA连接故障。。。

内容来自Android手机客户端

2b8fmc · 发表于 2016-3-28 23:54:47

跳线短接的2个点。

		自动登录	找回密码
密码			立即注册